16
Recording
This section explains how to specify a recording media folder for a recording file and to record into that folder.
The procedure for recording to an SD card and a USB drive is the same.
Selecting a folder to store recorded
files
1
Press the power switch.
The power of DN-F650R is switched ON and the power
indicator lights blue.
2
While the DN-F650R is stopped, press FILE LIST.
3
The folder list is displayed.
For details on how to display the folder list, see “Displaying the
File Menu (Preparation)” (vpage22).
• To change the recording media, display the recording media list and
then select the recording media.
• For details on the recording media list display and how to select
items, see “Storage menu” (vpage25).
4
Rotate the jog dial to select the folder in which you
want to save the recording le, and press the jog dial.
• To save a recorded file in a newly created folder, see “Creating
folders (2 Make Folder)” (vpage24).
5
Select “01 Select” in the folder list menu, and rotate
the jog dial.
• Choose the folder in which to store the recorded file, and display
the file list of that folder.
6
Press FILE LIST, and the screen returns to the
previous screen.
NOTE
To record on an SD card, be sure to format it on DN-F650R before
recording. If the SD card is formatted on a computer or is used for
recording without formatting it, this could result in sound cutoffs
during recording. For details on the formatting procedure, see “03
Media Format” (vpage14).
Recording
1
Press REC/M.TRACK to pause recording.
• REC/M.TRACK flashes red.
• Monitors the input source set for “02 Input” in the preset menu.
2
Adjust the recording level using REC LEVEL.
• To adjust the recording level, change “07 LevelCont” in the preset
menu to “Manual”.
• When you adjust the recording level, make sure that the peak level
is not 0dB by monitoring the level meter and level over display
(LEVEL).
• When “07 LevelCont.” in the preset menu is set to “ALC”, or when
“02 Input” is set to “SPDIF” or “AES/EBU”, the REC LEVEL cannot
be adjusted.
3
Use RECBAL L, R to adjust the recording balance.
• To adjust the recording balance, set “LevelCont” in the preset
menu to “Manual”.
• When RECBAL L is pressed, the R (right) volume decreases by 1dB.
When R is pressed, the L (left) volume decreases.
• This setting is maintained after the power is switched off.
• When the pre-recording adjustments are completed, stop the
source playback, and playback the recording source again from the
start.
• You cannot adjust REC LEVEL when “ALC” is set for “07 LevelCont”
in the preset menu or “SPDIF” or “AES/EBU” is set for “02 Input”.
Power switch
DISPLAYFILE LIST
REC BAL L, R
MARK
PLAY/PAUSE
Jog dial
REC LEVELREC/M.TRACKKEYBOARD STOP
Comentários a estes Manuais